| Customization: | Available |
|---|---|
| Warranty: | 1 Year |
| Structure: | Radial Drilling Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Rocker arm drilling machine is a rocker arm can rotate around the column and rise and fall, usually the headstock in the rocker arm for horizontal movement of the drilling machine. When machining holes on vertical drilling machine, the alignment of tool and workpiece is realized by the movement of workpiece, which is obviously very inconvenient for some large and heavy workpieces. The radial drilling machine can use the position of the moving tool shaft to center, which brings great convenience to the processing of holes on large and heavy workpieces in single and small batch production. [1]
It can also be called a rocker drill. Is a hole processing equipment, can be used for drilling, reaming, reaming, tapping and scraping end face and other forms of processing. According to the classification of machine tool clamping structure, rocker drill can be divided into hydraulic rocker drilling machine and mechanical rocker drilling machine. Among all kinds of drilling machines, the rocker drilling machine is convenient, flexible, widely applicable and typical, especially suitable for single piece or batch production of holes with porous large parts, which is a common machine tool in general machining workshop.
| Scope of application |
Radial drilling machine is widely used in single piece and small batch production, processing the holes of large volume and weight workpiece. The rocker drilling machine has a wide range of machining, and can be used to drill various screw holes, thread bottom holes and oil holes of large workpieces. Radial drilling machine is used to process medium and small holes on heavy workpieces or multi-hole workpieces. It is mainly composed of base, column, rocker arm, spindle box and spindle worktable. When the rocker arm drilling machine works, the rocker arm can rotate around the column, and the headstock can move radially on the rocker arm. This allows the drill to be aligned with the axis of each hole being machined for hole machining. More flexible use. When drilling the workpiece, the workpiece is often clamped on the workbench. When large workpieces are processed, the workpieces can be clamped on the base of the drilling machine. According to the different height of the workpiece, after loosening the locking device, the rocker arm can move up and down along the column to make the headstock and the drill bit in the appropriate height position.
|
Main structure |
The rocker arm drilling machine is mainly composed of base, inner column, outer column, rocker arm, headstock and worktable.The inner column is fixed at one end of the base, and the outer column is sheathed with the outer column, and the outer column can rotate 360 degrees around the inner column. One end of the rocker arm is a sleeve, which is set on the outer column to move up and down. Because the screw rod and the outer column are integrated, and the lifting nut is fixed on the rocker arm, the rocker arm cannot rotate around the outer column, but can only rotate around the inner column together with the outer column.Headstock is a composite component, which consists of main drive motor, spindle and spindle drive mechanism, feed and variable speed mechanism, machine tool operating mechanism and other parts. The headstock is mounted on the horizontal rail of the rocker arm and can be operated by a handwheel to move it along the rocker arm on the horizontal rail.
|
Specification parameter |
Z3050x16 |
|
Maximum drilling diameter |
50mm |
|
Distance from spindle centerline to riser bus bar |
350-1600mm |
|
Headstock horizontal moving distance |
1250mm |
|
Distance from spindle face to work table |
320-1220mm |
|
Lifting distance of rocker arm |
580mm |
|
Rocker arm lifting speed |
0.02m/s |
|
Swing angle of rocker arm |
±180° |
|
Spindle conicity |
5 |
|
Spindle speed range |
25-2000r/min |
|
Spindle speed series |
16 |
|
Spindle feed range |
0.04-3.2mm/r |
|
Spindle feed series |
16 |
|
Travel of spindle |
315mm |
|
Spindle maximum allowable torsional moment |
500N.m |
|
Main motor power |
4Kw |
|
Rocker lift motor power |
1.5Kw |
|
Hydraulic clamping motor power |
0.75Kw |
|
Cooling pump motor power |
0.09Kw |
|
Machine weight |
3500kg |
| Machine tool dimensions | 2500x1070x2840mm |
Processed sample
Company style
company profile
Suzhou Yonghang Machine Tool Equipment Co., Ltd. was established in 2011, is a product production, manufacturing, sales and service as one of the company, the company's main: radial drilling machine, turret milling machine, CNC machine tools, machining center, grinding machine, wire cutting, hydraulic press, sawing machine and so on. At present, the company's trade scale is expanding day by day, customers all over the world, the company adhering to the "professional, honest, trustworthy" business philosophy, has been the industry customers alike. We sincerely hope: you and I go hand in hand, create brilliant!
FAQ
1 Where is your company?
A.Our company is located in Suzhou, Jiangsu Province, China
2:How can I choose the most suitable machines?
A: Please tell me your specifications we can choose the best model for you, or you can choose the exact model.You can also send us the products drawing ,we will choose the most suitable machines for you.
3.How do you offer after-sale servi?
A: We usually offer technical support online by wechat or whatsapp. Customer describe the problems and send videos and pictures, our technician will help to solve the problems.
4: What's the Payment Terms?
A: T/T, 30% initial payment when order, 70% balance payment before shipment.
5.What's your MOQ?
A:We have it in stock. Minimum order is one.
){kind=link}